WIN XP PROBLEM!!!!

[jmh2578]

ok, i downloaded and ran the diagnostics software, ran a full scan on system, and all instances passed, have installed the motherboard monitor, system is running right now at 32 degrees F.

[jmh2578]

this is the read out from the fan, have no idea what it means, but here it is.......lol


MBM 5 Submit your board

Step 1

Check to see if your board is not yet on the MBM website
if it is and it matches with your settings then there is
no need to send this in

Step 2

You got MBM working on your board.

Step 3

Copy this report using the copy button at the bottom right
into an e-mail and send it to mbm@livewiredev.com

Step 4

Fill in the details below as good as you can.

Board maker:
Board type/name:
Board revision:
Which sensor is you case/system sensor:
Which sensor(s) are your cpu(s):
Extra info:


----MBM SYSTEM INFO-----

MBM 5.3.7.0
MBM 5 Core EXE : 5.3.7.0
MBM 5 Core DLL : 5.3.7.0
MBM 5 Settings DLL : 5.3.7.0
MBM 5 Dashboard DLL : 5.3.5.0
MBM 5 Hibernation DLL : 5.0.0.0
MBM 5 Ras DLL : 5.0.0.0
MBM 5 Logger DLL : 5.3.4.0
MBM 5 Mail, FTP and UDP DLL : 5.3.4.0
MBM 5 OSD DLL : 5.0.0.3
MBM 5 ASPI DLL : 5.2.1.0
MBM 5 Heat Up EXE : 5.0.0.0
MBM 5 Wizard : 5.3.5.0
MBMIO DLL : 2.32.64.2
MBMIO Driver : 1.0 built by: WinDDK

DLL Folder Location : C:\Program Files\Motherboard Monitor 5\DLL\
Data Folder Location : C:\Program Files\Motherboard Monitor 5\Data\
Language Folder Location : C:\Program Files\Motherboard Monitor 5\Language\
Log Folder Location (Alarm) : c:\program files\motherboard monitor 5\log\
Log Folder Location (High Low): c:\program files\motherboard monitor 5\log\
Log Folder Location (Interval): c:\program files\motherboard monitor 5\log\

Selected Language : English

Info ChipInfo.ini : 18154 bytes 6/17/2004 4:37:54 PM
Info shdn.ini : 388 bytes 10/12/2000 6:47:06 PM
Info Voltage.ini : 38234 bytes 6/26/2006 1:23:30 PM
Info Language file : 22920 bytes 6/12/2004 9:43:20 AM

Up Time MBM session : 00:00:09:01
Up Time MBM total : 00:00:09:01

------Sensor Chip-------

Main Sensor Chip : None
SMB Address : $0400
Used Bus : SMB CHIP VIA VT8237
Chip Address : $2F

-Sensor Chip Selections-


Selected Temp Sensors[1] : WinBond 1 (1)
Selected Temp Sensors[2] : WinBond 2 (3)

Possible Voltage Sensors[2] : MBM Fixed

Selected Voltage Sensors[1] : MBM Fixed (2)
Selected Voltage Sensors[2] : MBM Fixed (2)
Selected Voltage Sensors[3] : MBM Fixed (2)
Selected Voltage Sensors[4] : MBM Fixed (2)
Selected Voltage Sensors[5] : MBM Fixed (2)
Selected Voltage Sensors[6] : MBM Fixed (2)
Selected Voltage Sensors[7] : MBM Fixed (2)


Selected Fan Sensors[2] : W83697HF-2 T1 D4 (39)

Possible Voltage Sub Types[0] : None
Selected Voltage Sub Type : Error (9)

--Sensor Chip Readings--

Temperature Readout[1] : 0
Temperature Readout[2] : 0

---------System---------

Operating System : Microsoft Windows XP (NT 5.1) (Build 2600) Service Pack 2
User : the hebert's
Memory in use : 44%
Total Physical Memory : 523504 KB
Available Physical Memory : 290932 KB

----------CPU-----------

CPU Speed : 2398 MHz
Nr of CPU's : 1

-------3rd Party--------

ShutDownNow :

----Advanced Settings---

Fan Temp : 0
Custom Temp Table : 0
Startup Delay : 0
2E 4E Enabled : 0
2E Forced : 0
4E Forced : 0
Do Not Reset : 1
SMB Scan Range : $10 - $7F

-----INI settings-------

[General]
Language=English
Fahrenheit=1
Degree Symbol=1
Interval Time=1000
RAS Check=0
FIC SD-11=0
Ali SMBus=0
Start With Windows=0
Start With Splash Screen=1
Ask for Close Confirmation=1
Start Dashboard with MBM=0
Start Dashboard with MBM Delay=0
CSV symbol=;
Show All Sensors=0
SMBus 1st=1
Double Click Item=0
Startup Tab=0
Ignore Reset=1
Check Dashboard Position=1
SIS ITE Selection=0
Enable CPU Usage=0
Scan 2E 4E=0
VU Size=56
Tyan switch=0
Tyan type=0
HDD Scan=0
Scsi Scan=0
WaitTime HDDSCSI Temp=90
Bank Switch=0
Bank Smbus Reg=45
Bank Chip Reg=78
Bank Chip Val=0
INI Version=5109
Startup (Do not change)=2
Start Time Session=38894.5640348264
[Advanced]

[jmh2578]

is there any way that this issue is a compatibility issue with the graphics card?? i have an ati radeon card in it, could that be the problem?

[Gecko]

[jmh2578]

[Gecko]

[jmh2578]

[jmh2578]

[Gecko]

[jmh2578]

[stretch]

To me it sounds like my old problem .

If when your moving the mouse its jerking very slowly and then then suddenly dies then its most likley a heat problem .

If it just locks you out and yuou cant do anything at all try hitting the CAPS LOCK and or NUM LOCK and see if the lights above the numpad light up .... if they dont then it might be one or more of the ports on you motherboard .... whe this happend to me it was the mouse and keyboard ports and iu had to buy a new motherboard , but it might not be that .

I thought id give my views

[jmh2578]

thanks for the input, stretch, but we fixed the problem, it was the graphics cards, we had to upgrade it.