by icecube » Sat Sep 26, 2009 5:04 am
Hi PearlJamaholic
Glad to to hear that you were able to save the data. On any XP install, you always want everything disconnected, printers, scanners and slave drives. I would suspect that your USB drive was a bootable system at one time and if the bios has boot from USB as the first item, that is the one that XP will pick.
You could be facing many different problems here. If you are trying to install XP on a Vista drive, it will error out saying the CD is bad.--It isn't, you have to formate the drive and get rid of some Vista security files.
If you have a Dell with IDE cables, then everything is setup as cable select. This too can be a real pain. The boot drive is determined by a square hole punched in the IDE cable. The closest connector to the one plugged into the MB is the Master.
The other reason you would disconnect other drives, is that when XP boots up, if the other drive was bootable, it won't be anymore.
What I would recomend is to boot up with a dos boot disk and fdisk the drive and format it for a minute or two, and then try the install.