It is currently Tue Sep 01, 2026 11:51 am


pc keeps trying to boot from external hard drive

All versions of Windows 7, 2008 and Vista including 32 bit and 64 bit

Moderator: icecube

pc keeps trying to boot from external hard drive

Postby clennonuk » Sat Mar 13, 2010 12:08 pm

i have recently changed my os to windows 7 and i am having problems everytime my pc needed to boot i kept getting message bootmgr is missing so i fixed that and no i am getting message saying ntldr is missing.so i checked my boot settings and i was set to boot from my external hard drive which is why i am getting these error messages i have now unpluged my external hd and its boots and works just fine.How do i get it to boot from my hd rather than my external hd
i hope this makes sense to someone
cheers
User avatar
clennonuk
Senior Geek
Senior Geek
 
Posts: 158
Joined: Thu Feb 12, 2004 1:00 am
Location: London England

Thanks given:0
Thanks received:0
Top

Re: pc keeps trying to boot from external hard drive

Postby liljim » Sat Mar 13, 2010 11:31 pm

that should be a bios setting and not OS specific, make sure first boot device is bios is the right drive
User avatar
liljim
Moderator
Moderator
 
Posts: 3017
Joined: Mon Mar 03, 2003 1:00 am
Location: Louisiana
Operating System:

Thanks given:0
Thanks received:12
Top

Re: pc keeps trying to boot from external hard drive

Postby clennonuk » Sun Mar 14, 2010 12:43 am

The problem with that is in bios settings where it says about hdd group it says desktop seagate which is my external hd and my normal hd is listed as 3rd master
User avatar
clennonuk
Senior Geek
Senior Geek
 
Posts: 158
Joined: Thu Feb 12, 2004 1:00 am
Location: London England

Thanks given:0
Thanks received:0
Top

Re: pc keeps trying to boot from external hard drive

Postby icecube » Tue Mar 23, 2010 11:19 pm

Hi clennonuk

I'm assuming you have a SATA Motherboard. Usually there are 4 HD Connections on the board. The internal drive is plugged into #3. If you only have the one drive, leave it or get a flashlight and hook it up to the # 1 or #0 connector. They are either labled 1-4 or 0-3.

What you need to do is boot from the CD-rom with the windows 7 install disk and do a repair. You won't have to do a thing, its automatic. Just make sure the external drive is disconnected.

On an install windows can only have one boot drive. If you have two, windows solves the problem by disabling the second one to boot. That's why on a windows install you should only have one drive hooked up.

Hope this helps
User avatar
icecube
Moderator
Moderator
 
Posts: 1209
Joined: Wed Mar 10, 2004 1:00 am
Location: San Marcos Ca

Thanks given:0
Thanks received:0
Top


Return to Windows 7, 2008 and Vista

Who is online

Users browsing this forum: No registered users and 1 guest

cron