It is currently Tue Sep 01, 2026 1:33 pm


Power/Mobo Problem??

All computer hardware support

Power/Mobo Problem??

Postby Insane_Man » Fri Aug 22, 2003 10:49 pm

Hello, I'm new to the forum and I figured I'd get off to a roaring start by begging for help ;)
My PC won't power on at all.
Here's what happened: I took my secondary HD to a different computer to copy some files, then hooked it back up along with a case fan, which I decided to install to cool my drives. When I hooked my computer back up and pressed the power button, all that happened was a slight clicking noise while I was holding the button down. The noise seems to be coming from the center of the case, perhaps from where the PS connects to the Mobo. I should also mention that I had to put some stress on the power wires in order to hook my drive back up, because I have 3 HDs.

Anyone have this problem before or have any idea what could be causing this?

Thanks in advance for any and all intelligent input.

EDIT: I should also mention that I have already tried unhooking all of my drives from the power supply.
User avatar
Insane_Man
Newbie
Newbie
 
Posts: 2
Joined: Sat Aug 23, 2003 1:00 am

Thanks given:0
Thanks received:0
Top

Postby teststrips » Sat Aug 23, 2003 1:43 am

first thing i should mention is if your power supply overloaded, it probably threw it's internal breaker. The breaker can be re-set by completely unplugging the power from unit for a good 30 seconds.

If that doesn't work your psu may have gone belly up, or you might have fried something else?

Did you get smoke?
User avatar
teststrips
Geek Alumni
 
Posts: 542
Joined: Fri Jan 24, 2003 1:00 am
Location: USA - Pennsylvania

Thanks given:0
Thanks received:0
Top

Postby Insane_Man » Sat Aug 23, 2003 5:36 pm

No smoke, no fuss. I have had it unhooked from the wall for quite some time, and it doesn't work when plugged back in. There's just a slight clicking noise when the button is depressed. I'm kind of hoping that it's the PSU, as opposed to the MOBO, where the sound seems to be coming from. I took it to a computer store (UGH!), because I've just got too much other stuff to do with school starting next week (I just transferred, so I need to move to a different province) and stuff so I just didn't have the time to dick around with it any more.

It's possible that it could be the power supply, but I'm not so sure about that, since the only thing that's changed it that I added one 80mm fan. Previous to this, I have had no power problems whatsoever to indicate that I was pushing the limit.
User avatar
Insane_Man
Newbie
Newbie
 
Posts: 2
Joined: Sat Aug 23, 2003 1:00 am

Thanks given:0
Thanks received:0
Top


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron