It is currently Tue Sep 01, 2026 4:31 pm


PSU or Mobo problems

All computer hardware support

PSU or Mobo problems

Postby ManuelJ » Mon Nov 16, 2009 11:00 pm

Whats up people :) so the other day I came home after a weekend out, went straight to my pc. My mother had turned off the multiplug so as soon as I turned it on my pc went on as well. It did not boot, gave no displays, no beeps, no nothing. Only the lights and fans were running. On/off button wasn't working at all so I had to turn off the power supply.

So right now everytime I turn on the psu switch the computer automatically turns on but doesn't boot. Only way to turn it off is through the psu switch. I have an epox 9npa ultra motherboard that has an indicator led the displays a code that shows the pc status. It reads FF which according to the manual means "reserved".

I don't know if it's the psu or the mobo that's defective. Either way I really don't know what to do. I need some help guys, I'll greatly appreciated.

Manuel
ManuelJ
Newbie
Newbie
 
Posts: 1
Joined: Mon Nov 16, 2009 10:34 pm

Thanks given:0
Thanks received:0
Top

Re: PSU or Mobo problems

Postby jemmo » Fri Jan 08, 2010 4:58 pm

Sound like the same problem I have.

Boot the PC and the fans kick in, but the floppy doesn't initialise and after a few seconds the hard-drive light goes out. PC doesn't get to POST status (befor proper PC start up).

I was told if you remove all RAM sticks and boot the PC, you should get some warning beeps - this indicates the mobo is okay. I am waiting for confirmation (on another post) that this is true.

In the meantime I am searching the web for a replecement mobo where I don't need to buy a new processor and RAM as well. Not having much luck unless I want to buy used (same model) from China.
Jemmo
jemmo
Senior Geek
Senior Geek
 
Posts: 122
Joined: Tue Feb 24, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Re: PSU or Mobo problems

Postby Gecko » Fri Jan 08, 2010 10:08 pm

ManuelJ,

Turn the system on and then push and hold the On/Off button.
The system should turn off after 5 - 10 seconds of holding the button.
If that works then try the On/Off button to see if the system will boot.
User avatar
Gecko
Super Moderator
Super Moderator
 
Posts: 5209
Joined: Thu Oct 25, 2001 1:00 am
Location: Florida, USA

Thanks given:1
Thanks received:23
Top


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron