Page 1 of 1
Wireless nic distance...

Posted:
Sat Apr 24, 2004 5:30 am
by Cactus

Posted:
Sat Apr 24, 2004 9:54 am
by brad
Use an Access Point cabled to your existing Router would be best. (And a Wireless Card for the Computer) Depending on the location of the AP in your house and what obstacles are in the way, it may work well. I'd position the Access Point in a direct line of sight to your shop for best results.
Outside, with a clear shot, Wireless can be good for 1000 ft. Inside you're lucky to get 300 ft.
It mainly depends on what is in the path of the signal.
The signal goes in all directions but if you can give it a clear path it works best.
brad

Posted:
Sat Apr 24, 2004 7:47 pm
by Cactus
Thanks Brad....I think that's the route I'll take.
I didn't realize that outside would be a longer distance....cool.
So if I use wireless in the house...do the devices need to be in the same room or in-line or will this work through the walls??

Posted:
Sun Apr 25, 2004 9:35 am
by brad
They'll work through walls. The more walls and structures (like Fireplaces, Ductwork, and Concrete walls) the signal has to go through, the weaker it becomes. Locate the Access Point in a central area if possible.
brad

Posted:
Sun Apr 25, 2004 3:52 pm
by Cactus
Thx Brad....
