Page 1 of 1

Sound card help

PostPosted: Thu Aug 19, 2004 5:11 pm
by rhouzer
I would like to know which sound card is better:

Creative Sound blaster 16 pci

or

Integraded Direct Sound AC97 on myK7T Turbo 2 Motherboard

PostPosted: Thu Aug 19, 2004 5:27 pm
by Cactus
I would think installing the SB PCI card would deffinitly have advantages!!

Just my view... :)

Cactus

Creative Sound blaster 16 pci Drives

PostPosted: Thu Aug 19, 2004 5:42 pm
by rhouzer
Does anyone know where I can get Creative Sound blaster 16 pci drivers? Creative's website does not have any and there support says they dont support that card (even though the box says over 100 million sold). I have windows xp pro and the card supports hardwarebuffering and EAX but i can find no drivers for it.

PostPosted: Thu Aug 19, 2004 10:04 pm
by Cactus

PostPosted: Fri Aug 20, 2004 10:25 am
by noby
Look on the card, it should say something like : model CT4760.
If you bring that number in on their search engine, you'll find the drivers

PostPosted: Fri Aug 20, 2004 4:09 pm
by rhouzer
Creative AudioPCI (ES1371,ES1373) (WDM)

But creative only supports ct not es version

PostPosted: Fri Aug 20, 2004 4:19 pm
by Cactus




Let us know if they work or if you have probs downloading or installing them.


The WDM drivers are ChipSet specific...



Cactus

cant install

PostPosted: Sat Aug 21, 2004 2:12 am
by rhouzer

PostPosted: Sat Aug 21, 2004 2:52 am
by Cactus
Right–click My Computer, click Manage, and then click Device Manager. The Device Manager opens...

Highlight the OLD device you wish to remove and Click remove.
Then try rebooting see which drivers get installed.


Cactus

PostPosted: Sat Aug 21, 2004 9:44 pm
by rhouzer
did that and windows automaticly installs the old drivers on start up

PostPosted: Sat Aug 21, 2004 11:17 pm
by Cactus
Ok..make sure the new drivers are in a folder somewhere on your Hardrive and you know where they are.
If the drivers came in a ZIP folder make sure you open it in that folder first.
After you re-boot and Windows detects the Device and it wants to install the drivers,click cancel,then click browse and point to folder with drivers.
If you can't do that...just

1. Right-click My Computer, Properties.

2. Next, go to the device manager tab and select the hardware item you would like to update (Win 2000 users, head to the Hardware tab and hit the Device Manager button). You'll probably need to click the plus sign next to each category in order to actually get to a specific piece of hardware.

3. Right-click the item you want to update and select Properties from the resulting menu.

4. First click remove then Click the Update driver button on that tab. A wizard will start and help you install your new driver. Click the Next button.

5. Click the "Search for a better driver..." radio button. Click Next.

6. Finally, tell the computer where the new driver file is using the "Specify a Location" drop box and the Browse button. If you're using Win ME, it will automatically start looking for the new driver at this point. If it doesn't find it, you'll have to tell it where to look.

Once the driver is located, you'll be able to finish up with the wizard. You'll probably need to re-start your computer.

Don't know if that will work but you can try...
Maybe someone else has some ideas...

Cactus

one too many

PostPosted: Sun Aug 22, 2004 12:32 am
by icecube
It sounds like you have two active sound cards. Go into the bios and disable the sound on the mother board or remove the SB card. Windows XP should be able to install the drivers for those old cards without asking for a driver disk.