Page 1 of 1
My moniter wont display anything/keyboard or mouse dont work
Posted:
Wed Dec 01, 2004 12:27 amby kuja1217
I had taken out the sd 128mb ram chip and put it back in...now my moniter wont display anuthing when I turn on the computer so I cant ebter setup...I get three beeps but it takes about 3 minutes for them to sound...Is my motherboard fried? or do I ned new ram?
Posted:
Wed Dec 01, 2004 12:43 amby Limp
Ram
Posted:
Thu Dec 16, 2004 8:21 pmby matsta
Its most probally your ram,have you tried another ram in there just to test it? if the computer beeps it means that there is no ram present and that must mean that the ram is either damaged or just failed,try another stock of ram and then see what happens.....MAtsta
Posted:
Fri Dec 17, 2004 7:03 amby icecube
Make sure that you PULL the power plug when changing out RAM most motherboards are hot even when off (power is supplied to the board).
I think that Limp is right, you didn't fully seat the ram-- you should hear two distinct clicks when it goes in right.