Setting an server using a Zoom/NAT firewall
Posted: Mon Sep 15, 2003 6:16 pmPCTech Forums
A friendly computer support place
https://www.pctechforums.com/
Setting an server using a Zoom/NAT firewall
Page 1 of 1
Posted: Mon Sep 15, 2003 6:16 pmPosted: Tue Sep 16, 2003 10:41 amOK - lets start with the basics. I assume you are connecting with ADSL? Why do you have a router AND a hub? Normally the router would have multiple connections and you can connect computers directly to the router. Finally, what services are you trying to run on the internal machine (eg ftp, game server etc etc)?
Posted: Tue Sep 16, 2003 11:00 amok our hub is to directly link every computer to the house, it is a 8 port hub, and our router is linked to our uplink port i think of our hub which connects to the internet. Im trying to use bulletproof server, which is going to be a standard server with crap on like games software music
Posted: Tue Sep 16, 2003 3:04 pmAre all the PC's on the same Workgroup? Can all the PC's on your LAN access each other? If not, then try putting them all on the same workgroup.
Posted: Tue Sep 16, 2003 10:13 pmOK then - can other machines on the LAN connect to the ftp server using the internal ip of the ftp server?
Posted: Tue Sep 16, 2003 11:08 pmyes all the pc are on the same workgroup and there can all access my server through the lan, but my friends can access it from the web
Posted: Wed Sep 17, 2003 1:15 pmOK - are your friends who are trying to connect to your server behind a firewall? If they are, as well as forwarding port 21 to your server machine, you will also need to specify some passive mode ports in bulletproof and forward these as well. In addition you will need to specify your internet ip in the bulletproof settings.
If you can't figure this out, say so & I'll post some more detailed settings
If you can't figure this out, say so & I'll post some more detailed settings