It is currently Tue Oct 20, 2026 8:04 pm


Tyan Tiger MoBo / BIOS

All computer hardware support

Tyan Tiger MoBo / BIOS

Postby CanadianTek » Fri Sep 17, 2004 9:48 pm

have a win xp system with rapid boot turned on...

and .. don't see any message for jumping into bios/cmos setup...

tried the Del key on post.. no go

know that sometimes various manufacturers.. use Esc, or F1 or F2..

not completely familiar with tyan... any buddy own one.. and can tell me it would be great to know...

why do i need to get into the bios

to turn off the power management facilities..

when pc was directly connected to the rogers cable high speed modem and left alone for 2 hours.. fired it right back up .. all was fine...

as soon as i hooked it up to the u.s.robotics usr8054 wireless router..via an rj 45 cable.. it chokes after sitting unused for 2 hours. can use word, or excel, just cant get to the net.. to surf or to get outlook mail, but if i reboot.. all is fine

...probably has something to do with a) corrupt Wake On Lan logic of the nic, .. as controlled thru the bios.. or the power management facilitiy.. doesnt wake up out of snooze.. etc.. so i was gonna shut that off..


i have 3 paths to pursue...

went to tyan site.. looked at the pdf file for the tyan tiger.. but

ftp://tyan.com/manuals/ proved the manual proved to be of no help... as it didnt tell me what the acesss key was...del, f1, f2 or esc.. :(

or

go into the router settings and make sure the mtu is set to the proper value (1492 or 1500??) but the second system which is wireless.. works just fine.. no time outs..
no freeze ups on net based apps..


or

fiddle with the APM utilties in control panel

...did it .. turned it off... and it still goes to sleep after a couple hours.. screen, mouse, keyboard, cpu awake.. but.. internet does not..

or..
searched here.. in your database..found nothing Tyan Bios related

so im hoping somebody here owns one... or has had a similar experience.. and can advise me best path..

thanx
User avatar
CanadianTek
Geek
Geek
 
Posts: 90
Joined: Fri Jun 11, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby Cactus » Sat Sep 18, 2004 4:06 am

As far I can find,not knowing the Model or Bios type..it would be the DEL key to enter the BIOS setup on Tyan pc.
Start tapping key at the start of Boot-up and keep tapping until you enter.
Hope that helps...

Cactus
User avatar
Cactus
Geek Alumni
 
Posts: 1330
Joined: Sat Nov 30, 2002 1:00 am
Location: Somewhere...

Thanks given:0
Thanks received:0
Top

Postby noby » Sat Sep 18, 2004 1:42 pm

you should identify your mobo first; mostly its something like P4P800-SE.
You can do this by opening the case, and look for the printing on it, or you can install a program which will do it for ye, like everest. You can get it from : http://www.lavalys.com/index.php?page=product&view=1
User avatar
noby
Senior Geek
Senior Geek
 
Posts: 274
Joined: Mon Feb 09, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby icecube » Sun Sep 19, 2004 4:13 am

you might only have two seconds at most to hit the delete key --try hitting the del key as you turn it on. If that doesn't work, turn off the system and clear the cmos and then reboot the system.

The issues you describe sound as if you might need to flash the bios with an update.
User avatar
icecube
Moderator
Moderator
 
Posts: 1209
Joined: Wed Mar 10, 2004 1:00 am
Location: San Marcos Ca

Thanks given:0
Thanks received:0
Top


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron