It is currently Tue Oct 20, 2026 3:00 pm


Soyo SY-K7VTA Pro Motherboard

All computer hardware support

Soyo SY-K7VTA Pro Motherboard

Postby caboosejjs » Thu Jun 03, 2004 1:52 am

After all the research on quality parts i did on toms hardware and epinions, I reccently bought all the components to assemble a cosutmized pc. I had posted on here previously whether an Amd 1.3Ghz processor would work with a Soyo SY-K7VTA Pro Mobo and got a reply it would. Well, I might not have informed on the message that it was a Duron processor. I installed all the parts and powered on and the processor would not work. It is a known working processor also. Can anyone here confirm to me whether the issue here is an incompatible processor?
User avatar
caboosejjs
Geek
Geek
 
Posts: 69
Joined: Wed Mar 03, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby Cactus » Thu Jun 03, 2004 2:41 am

Says they are compatible here:

http://www.motherboard.cz/mb/soyo/SY-K7VTAPRO.htm


Cactus
User avatar
Cactus
Geek Alumni
 
Posts: 1330
Joined: Sat Nov 30, 2002 1:00 am
Location: Somewhere...

Thanks given:0
Thanks received:0
Top

Postby Restek » Thu Jun 03, 2004 6:56 pm

User avatar
Restek
Geek Alumni
 
Posts: 1002
Joined: Tue Sep 18, 2001 1:00 am
Location: Uk

Thanks given:0
Thanks received:0
Top

Postby caboosejjs » Thu Jun 03, 2004 9:03 pm

The guidebook says under key features:
supports socket a amd processor
supports 200Mhz front side bus ddr transfer on
althlon ( 750Mhz-1.3Ghz)
Duron (600Mhz-950Mhz)
supports 266Mhz fsb ddr transfer on athlon(1Ghz-1.6Ghz)

Initially this made me beleive that this the processor is incompatible. Again were talking about a duron 1.3Ghz.
I also need to verify the ram i have which is a via. This feature info is referring to the fbs though correct? or is the compatilbe processors
User avatar
caboosejjs
Geek
Geek
 
Posts: 69
Joined: Wed Mar 03, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby Restek » Fri Jun 04, 2004 3:29 pm

User avatar
Restek
Geek Alumni
 
Posts: 1002
Joined: Tue Sep 18, 2001 1:00 am
Location: Uk

Thanks given:0
Thanks received:0
Top

Postby caboosejjs » Sun Jun 13, 2004 8:53 pm

I power up the computer. Hear the power supply run. Beyond that absolutely nothing happens. I have no Post. No Cmos screen. Nothing.

The Ram i am using is a NEC 128MB 16M*64 PC 133/100 168Pin Sdram. There is no onboard video also. I am using a Radeon AGP card. I dont know exactly what kind off the top of head but I figure this shouldnt be an issue with compatibilty.
User avatar
caboosejjs
Geek
Geek
 
Posts: 69
Joined: Wed Mar 03, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby Geekgirl » Sun Jun 13, 2004 9:04 pm

Its possible you got a bad stick of RAM. No beep at boot would make me think it was the memory. Do you have another stick that you know is good to try? Thats what I would do
Geekgirl
Geek Alumni
 
Posts: 1214
Joined: Mon Apr 12, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby caboosejjs » Sun Jul 11, 2004 3:45 am

It turned out to be a defective motherboard and a defective RAM chip. Both bought online. I'm going to have to watch who I buy from for now on.
User avatar
caboosejjs
Geek
Geek
 
Posts: 69
Joined: Wed Mar 03, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby Geekgirl » Sun Jul 11, 2004 3:49 pm

Buying from a repitable supplier is a must but you can always get a faulty piece of hardware from the best known supplier. Buying from the best doesnt always mean your gonna get the best, purchasing on-line is always a gamble.
Geekgirl
Geek Alumni
 
Posts: 1214
Joined: Mon Apr 12, 2004 1:00 am

Thanks given:0
Thanks received:0
Top

Postby caboosejjs » Mon Jul 12, 2004 2:12 am

Thank you for your help
User avatar
caboosejjs
Geek
Geek
 
Posts: 69
Joined: Wed Mar 03, 2004 1:00 am

Thanks given:0
Thanks received:0
Top


Return to Hardware

Who is online

Users browsing this forum: No registered users and 17 guests