New Build Problem (First Timer)

[goony]

[icecube]

You might have overlooked installing the cd that came with the motherboard.

What you probably have is an IRQ conflict.

Pull all the cards except the video and install the motherboard drivers, then the video drivers and then put the other cards in one at a time and install the software for each.

That Compro VideoMate TV Ultra card goes next to the video card ( if its what I think it is). Install that second after the video card.

Hope this helps

[goony]

I have installed all of the drivers that came with the mobo cd, the only items I have yet to find drivers for are the sm bus controller and I need to find an updated usb driver. As for the TV capture card, the manual instructs that it should be placed at least two pci slots from the agp slot.

[icecube]

I'm just guessing here, but normally the video assist card goes next to the video card, they share the IRQ. Motherboards are designed with that factor in mind.

There might be a language translation issue here. Put it in the second slot and see if it works.