PCTech Forums

by **Username** » Sat Jul 21, 2007 2:11 pm

hi

my pc is not sending any signals to my monitor. after posting on other forums ive learnt that this might be a graphics card problem.

ive bought a new graphics card, how do i install it without anything on the monitor?

please help

thank you

by **venney** » Sat Jul 21, 2007 2:21 pm

hello and welcome.
It is relativly simple.
I hope you have baught the correct grapphics card type, there are 2 types of graphics card, pcie & agp.

If you have the correct one, it is as simple as opening your case up and slotting it in.

here is a guide for agp
http://reviews.cnet.com/4520-3118_7-5023982-1.html

for pcie

http://www.youtube.com/watch?v=femSBniU ... ed&search=

so whichever your pc has, follow those

if you need help take a picture and show me. Once the card is installed, you connect your monitor to the card, and then you can download and install latest drivers.

if you have baught an agp card, and your pc is pcie you cannot install it, and vice versa.

by **Username** » Sat Jul 21, 2007 2:35 pm

i dont think i explained properly

at the moment nothing comes on the screen when the computer is running. the monitor says it is working and that i should check the pc and signal cable. ive tried my tv and nothing shows on it either.

the new graphics card is in the AGP slot but i cant install the driver because nothing shows on screen. you with me?

thanks

by **venney** » Sat Jul 21, 2007 3:11 pm

it sounds like the card may be faulty. You dont need a driver i dont think, it should run in the lowest resolution by default.

is your monitor cable plugged into your mobo graphics or the graphics card?

by **Username** » Sat Jul 21, 2007 3:29 pm

ive tried both, on the mobo and on the Gcard. the new Gcard is brand new.

by **Username** » Sat Jul 21, 2007 5:41 pm

ive tried the graphics card with my tv and still no luck.

what i did to get this problem was, i pulled the monitor cable out while the computer was running.

what else could have damaged?

+ the monitor and tv autmatically switch off after around 30 seconds

by **venney** » Sat Jul 21, 2007 9:16 pm

i dont think it will of affected your graphics card by the monitor cable coming out.
Are you sure the new card is installed correctly?

to be honest, im out of ideas, maybe wait and see if someone else has any ideas.

by **Username** » Sun Jul 22, 2007 7:29 am

what reasons can you think of for the pc not sending signals to the monitor?

by **venney** » Sun Jul 22, 2007 11:47 am

id of thought faulty graphics card, but if the onboard one isnt working either i dunno.

see what someone else thinks.

PCTech Forums

onboard graphics card problem

onboard graphics card problem

Who is online